Deep Dive into embedded systems with an in-depth understanding of 8051 microcontroller with embedded C programming

A super simple & easy to follow 8051 Micro Controller  course specially designed for those who have never done embedded programming

We will study 8051 with embedded C programming. We’re going to study about the 8051 microcontrollers with Keil 8051 IDE. Keil microvision is a very old & very popular IDE used for microcontroller programming. A perfect mix of theory and practical’s, with many real-world examples, exercises and step-by-step solutions without lengthy descriptions!

● 8051 Architecture

• ● Understanding Assembly Vs C Programming
• ● Microcontroller Simulations
• ● Downloading hex file onto microcontroller.
• ● Understanding I/O Interfaces with 8051
• ● Programs for Relay / buzzer / sensor / serial communication and many more
• ● Project making with 8051 microcontroller

I believe everyone can learn and excel in coding with right tools and proper guidance. Hence I have made this courses and 30% of it is available for free preview, watch them, if you feel right, enroll!!! I hope you'd like this transparency!!!

I believe that anyone can learn and experiment with technology.

All that is needed is the desire to learn and the right guidance.  That’s the reason, this course is focused on both

• Absolute beginners and

• Intermediate developers in embedded systems.

We’re going to study about embedded systems with 8051 microcontrollers in this course.

This is a 8051 Course for Absolute Beginners:

8051 is by far one of the oldest microcontrollers which are still used today. With over 70+ different manufacturers, 8051 is available in a variety of flavors. What makes it special is the simplicity it offers to the programmers and developers. Being one of the first microcontrollers, the architecture of 8051 is quite simple with very few basic features. And those very basic features make 8051 the winner in terms of simplicity in usage.

In this course, we’ll study 8051 with embedded C programming. We’re going to study about the 8051 microcontrollers with Keil 8051 IDE. Keil Microvision is a very old and very popular IDE used for microcontroller programming.

This is a hands-on driven course where we’ll be writing a lot of codes and trying out its outputs. We’re going to study 8051 microcontroller and its interfacing with a number of peripheral devices like

And while doing so, we’ll be doing a number of different experiments to evaluate the skills we have been learning. The course outcome is to enable everyone to be able to use 8051 microcontrollers and start creating projects on it.

Even if you do not know any C programming before, do not worry, there’s a brief introduction to C programming also.

• ➤ LEDs

• ➤ Switches

• ➤ Relay

• ➤ LCD

• ➤ ADC

• ➤ Temperature Sensor

• ➤ Stepper Motor

• ➤ DC Motor

• ➤ PC Interfacing

• ➤ Device Control

This course comes from a developer

From the past 10 years, I've developed more than 150 projects in 8051 microcontrollers alone. This course doesn't come from a trainer following a set syllabus, this comes from a real developer who's involved in real projects for a better part of his career. So there are many practical considerations mentioned from the time to time in this course.

Barebone Controller Coding

Programming and using a microcontroller is not like using Arduino’s where you just write C code and download it into IC. This is a barebone coding experience where we’re going to learn the insights of 8051 microcontrollers and understand at the core how to write the program for each of its features. This single quality separates the hobbyists and professionals apart. If you’ve once understood how to go into the features of the microcontroller, look into registers and configure them to use, then you’ve understood the holy grail of embedded systems development. We’re going to do exactly this in this course. We’ll be using each feature of 8051 by completely studying the internal registers. Once you’ve understood it, you can take any microcontroller and start writing a program for it just by looking into the datasheet. The input/output pins, timers, counters, serial port, are discussed at length to understand the theory better and then we’ve done some quick experiments with it on the go.

Simulations

Many of you may or may not have an 8051 development board with you, hence, I’ve included simulation models of every single exercise that we’re going to do in this course. And I’ve also shown the downloading procedure for one of the simplest microcontrollers that I use on a daily basis.

Be Assured

Believe it or not, am doing embedded systems development and training from the past 10 years. I’ve developed more than 500 different products / mini projects and trained more than 10000 students from over 65 countries. You can be assured that whatever I’ve included in this course comes not only from books but also from my experiences in developing systems.

Test Drive it

Take the free preview before enrolling in the course, 30% of the course is free for you. Decide if it’s good for you or not even before enrolling. See and decide if you can understand and cope up with the content and the presenter of the course!!!

13 sections • 37 lectures • 4h 57m total length

More than 19000 Students from 147+ Countries have enrolled to our courses

"We believe everyone can learn and excel in technologies with right tools and proper guidance"

M.E. Electronics, 12 Years of Experience.

Engineer, Developer and Trainer, Founder of Kitflix.com

Amit Rana is an Industrial Consultant for Internet of Things and Embedded Systems. Amit is a Product Development Specialist in Electronics and also an Online and Corporate Trainer.

Currently building a platform (kitflix) for everyone who is interested in learning electronics and related technologies.

Ranging from simple counter to IoT system for CNC machines and end to end product development for smart cars, Amit has made his passion for electronics and programming a hobby and a full time profession

By Education.

Current and Past Work Experiences. After the initial couple of years, I've spent all my career in managing my own businesses

Programmer Analyst Trainee Working on Java Platform 

Programmer Analyst Trainee, 2009-2010

Robotics and Embedded Training Center

Founder and Instructor, 2010-today

Automation Consultant, Devgiri Forgings Pvt Ltd

Professional Consultant, 2019-today

Online School to Learn Embedded System  and  IOT

Founder and Instructor, 2017-today

His online students count is more than 19000 and spans more than 147 Countries across the globe

He has Worked on multiple Embedded technologies and devices for development of customized embedded solutions for industries and various product development requirements. Amit Rana is Master of Electronics engineering and has a total experience of 12 years, Amit is an avid reader and also loves cooking, he loves to read books on various topics and spend his spare time with his family cooking variety of dishes with his kids.

I am a Professional Expert Trainer at 

Programming and using a microcontroller is not like using Arduino’s where you just write C code and download it into IC. This is a barebone coding experience where we’re going to learn the insights of 8051 microcontrollers and understand at the core how to write the program for each of its features. This single quality separates the hobbyists and professionals apart. We’ll be using each feature of 8051 by completely studying the internal registers.