Arduino

Arduino Programming using simple drag and drop

Instructor

Amit Rana

Reviews 4.90 (10 Reviews)

Course Overview

Get Started with Arduino without writing a single line of code!!!

I firmly believe that everyone, regardless of their age, education or any other factor can start experimenting with Arduino and have fun doing it. Do lots of projects, either as a hobby or as a profession. With the same belief, Arduino itself was created and I am taking one small step ahead to make sure everyone finds it easier to start Arduino programming even easier.

Hence I’ve created this course with Ardublockly, which is a block-based Arduino programming based Course, where the students are not even needed to write a single line of code to learn Arduino!!! Yes, it’s damn exciting and I’m sure you’ll find it very easier to follow through the entire course. If you believe that you can make lots of projects with Arduino then read on…

Get Started with Arduino without writing a single line of code!!!

Do you want to learn Arduino but don’t know to code? Then this course is specially designed for you. This course makes use of the Ardublockly which generates Arduino Code directly by using simple blocks. Anyone who can read English can program Arduino’s with this course. There are lots of interesting interfaces included with Arduino which makes the course very much interesting. A detailed study of every interface including how to make connections on a breadboard and how to use every sensor with Arduino takes you from a complete beginner level to an intermediate level. With 25 different projects to finish, this is sure to keep you hooked for days

Support is here, shoot your queries!!!

This is the course, which has taken the longest time for me to create and record.

It took so many hours to record and re-record this course, was pure because of the nature of course, as I wanted anyone and everyone from any kind of background to be able to attend this course and learn how to do the experiments with Arduino.

Start Experimenting now!!!

What You'll Learn?

  • Get started with Arduino without any programming experience
  • Be able to use arduino boards for project creation
  • Explore and use different interfaces with Arduino with their technical explanation
  • Build 25 different experiments and projects with Arduino
  • Use Ultrasonic Sensor interfacing with Arduino and build a distance meter
  • Use Servo Motor with Arduino
  • Use temperature sensor with arduino and create temperature controller
  • Create PC based Device Control
  • Be a maker!!!
  • If you're interested in arduino but don't know coding, this course is for you
  • Anyone who wants to Learn Arduino, Students, Hobbyists and anyone interested in electronics
  • People interested to start project making without learning complex coding
  • Those willing to learn arduino in the simplest possible manner
  • This is an absolute beginners course. No previous knowledge is required
  • Be able to use PC/Laptop
  • Have access to Arduino and some basic components including breadboard, wires and few interfaces
  • Tools: Arduino Uno with Cable
  • LEDs, Switches, Buzzer, Micro Servo Motor
  • Common Anode Seven Segment Display, Common Cathode RGB LED
  • 10k Potentiometer, LM35 temperature sensor, Light Dependent Resistor (LDR)
  • Mix Resistor Values : 10k, 1k etc... specified in particular project
  • 1 x Breadboard, 1 x Ultraosonic Distance sensor and connecting wires (male to female)

Course Content

  • Introduction to Arduino
    • Introduction to Course

      00:01:16
    • Introduction to Embedded System and Arduino

      00:04:00
    • Arduino Basics

      00:08:46
  • Arduino and Ardublockly Installation Downloading
    • Arduino IDE and Ardublockly installation on PC

      00:10:00
    • Writing Program into ArduioBlockly and downloading

      00:10:00
    • Program Downloading using Arduino IDE

      00:04:56
    • Alternate Ways to Follow Ardublockly

      00:01:00
  • Arduino Interfaces
    • Using Breadboard

      00:08:24
  • LEDs
    • LED Interfacing

      00:11:27
    • Project 1: All LED Blinking

      00:01:27
    • Project 2 : Alternate LED blinking

      00:01:00
    • Project 3 : 4 LEDs on 4 LEDs off

      00:01:00
    • Project 4 : LED Chaser

      00:01:00
    • Project 5 : 10 times LED Blinking

      00:01:00
  • Switches
    • Switch Interfacing

      00:10:44
    • Project 6 : LED and Switch Interfacing

      00:01:31
    • Project 7 : 2 LEDs and 2 Switch Interfacing

      00:01:00
  • Buzzer
    • Using Buzzer with Arduino

      00:03:20
    • Project 8 : Buzzer Programming

      00:01:10
    • Project 9 : Buzzer and LED programming

      00:00:50
  • Tri Color LED
    • Tricolor LED interfacing

      00:05:27
    • Project 10: Tri-Color LED Based Red,Green, Blue Color Generation

      00:00:50
    • Project 11: Tri Color LED Based Yellow, Cyan and Magenta Color Generation

      00:01:05
    • Project 12: Traffic Light Controller

      00:00:40
    • Project 13: Tri Color LED and Switch Based Color Generation

      00:01:53
  • Seven Segment Display Interfacing
    • Seven Segment Display Interfacing

      00:04:00
    • Project 14: Up Counter Using Seven Segment Display

      00:04:00
  • Serial Communication on Arduino
    • Introduction to Serial Communication

      00:13:00
    • Project 15:Printing a Message into Monitor Window

      00:01:00
    • Project 16: Message Reading Using Serial Communication

      00:01:00
    • Project 17: Device Control

      00:03:00
  • ADC and analog sensors
    • ADC concepts

      00:17:00
    • Project 18: Digital Thermometer

      00:02:00
    • Project 19: Digital Voltmeter

      00:02:00
    • Project 20: Digital Light Meter

      00:01:00
    • Project 21: Temperature Controller

      00:01:00
  • Pulse Width Modulation
    • Introduction To Pulse Width Modulation and its Concepts

      00:12:00
    • Project 22: LED Fading

      00:01:00
  • Ultrasonic Distance Sensor
    • Ultrasonic Sensor concept

      00:14:00
    • Project 23: Distance Meter

      00:01:00
    • Project 24: Water Level Indicator

      00:01:00
  • Servo Motor Interfacing
    • Servo Interfacing with Arduino

      00:15:00
    • Project 25: Servo Based Angular Control

      00:01:00
  • Conclusion
    • Conclusion

      00:01:00
Free
  • Duration 00:03:21
  • Lessons 44
  • Enrolled 44
  • Skill Experts
  • Last Update February 22, 2024